Features
●All-digital IF technology
●Frequency range : 9KHz to 6GHz
●Minimum display noise level (DANL) up to -165dBm/Hz
●Power dynamic range up to 100dB and maximum continuous input power >= 27dBm
●SSB phase noise -90dBc/Hz @10kHz offset (typical)
●Minimum RBW is 1Hz
●RF Attenuator Range : 0~55dB, 5dB step
●Support ACPR, channel power, transmit bandwidth, occupied bandwidth, C/I measurement
●Support AM, FM, FFT, IQ demodulation at zero bandwidth
●7 inch color touch screen LCD, high resolution 1024*600
●Strong file management ability: batch edit/delete/filter supported
●Support normal, black and white, night vision, highlighting and other display modes
●More than 4.5 hours working time
ShinewayTech® FSA-100 series 6GHz spectrum analyzer are widely used in 2G/3G/4G/5G etc. FSA-100 series have the industry's rare high receiver sensitivity performance with a minimum display average noise level of -165dBm/Hz. Power measurement dynamic range up to 100dB, maximum RF input power exceeds 27dBm. FSA-100 series are equipped with a 7" ultra-large capacitive touch screen (resolution 1024*600) for an excellent user experience.
The FSA-100 series combine high performance, high portability and maneuverability with excellent engineering design, making it small and light in weight. At the same time, with more than 4.5 hours of working time, it can meet all kinds of complex environment signal measurements. The FSA-100 series is an essential measurement tool for the construction, upgrading and maintenance of next-generation wireless networks.
Measurement (Sweep Mode)
Measurement (ACPR)
|
Model |
FSA-100A |
FSA-100B |
|
|
Measurement Mode |
|||
|
Sweep mode |
frequency sweep, adjacent channel power ratio, channel power, OBW/EBW, carrier-to-noise ratio |
||
|
Zero bandwidth mode |
AM, FM, FFT, IQ Demodulation |
||
|
Frequency |
|||
|
Frequency Range |
9 kHz to 6GHz |
9 kHz to 4GHz |
|
|
Counter resolution |
1 Hz |
||
|
Frequency Range |
0Hz，100 Hz ~6GHz |
||
|
Frequency Resolution |
1 Hz |
||
|
Frequency Reference Source |
|||
|
Master Frequency |
100 MHz |
||
|
Initial Accuracy（15℃ to 35℃） |
<±1 ppm |
||
|
<±0.5 ppm |
|||
|
<1.5 ppm/ year |
|||
|
10 kHz Carrier offset |
<-90 dBc/Hz (Typ.) |
||
|
100 kHz Carrier offset |
<-100 dBc/Hz (Typ.) |
||
|
1 MHz Carrier offset |
<-115 dBc/Hz (Typ.) |
||
|
Bandwidth |
|||
|
Resolution Bandwidth RBW (-3dB) |
1 Hz to 3 MHz, 1-3-10 step |
||
|
Filter Shape Factor (60dB:3dB) |
<5 |
||
|
Video Bandwidth VBW (-3 dB) |
1 Hz to 3 MHz, 1-3-10 step |
||
|
Amplitude |
|||
|
Amplitude Range |
Displayed Average Noise Level（DANL）to +27 dBm |
||
|
Amplitude Accuracy |
±1.5dB |
||
|
Reference Level Range |
-160dBm - +40dBm |
||
|
RF Attenuator Range |
0dB-55dB,5dB step |
||
|
Amplitude Units |
dBm/dBv/dBmV/dBuV/V/mV/uV/W/mW/uW/nW/pW |
||
|
Maximum DC Voltage |
50 V |
||
|
Maximum damage level |
CW Signal: +28 dBm (50MHz~6GHz) Pulse Signal: +31 dBm (50MHz~6GHz) Note: RF attenuation is 30dB |
||
|
+10 dBm (9kHz~50MHz) |
|||
|
Displayed Average Noise Level（DANL） |
|||
|
Test conditions: Reference level -40dBm, RF attenuation 0 dB, trace the average number≥ 50, normalized to 1 Hz, 20℃ to 30℃, input impedance 50 Ω |
|||
|
Preamplifier Off |
9 kHz to 10MHz |
<-143 dBm (Typ.) |
|
|
10MHz to 1GHz |
<-157 dBm (Typ.) |
||
|
1 GHz to 2 GHz |
<-156 dBm (Typ.) |
||
|
2GHz to 3 GHz |
<-152 dBm (Typ.) |
||
|
3 GHz to 4 GHz |
<-152 dBm (Typ.) |
||
|
4 GHz to 5 GHz |
<-146 dBm (Typ.) |
||
|
5 GHz to 6 GHz |
<-145 dBm (Typ.) |
||
|
Preamplifier On |
9 kHz to 10MHz |
<-147 dBm (Typ.) |
|
|
10MHz to 1GHz |
<-165 dBm (Typ.) |
||
|
1 GHz to 2 GHz |
<-165 dBm (Typ.) |
||
|
2GHz to 3 GHz |
<-163 dBm (Typ.) |
||
|
3 GHz to 4 GHz |
<-164 dBm (Typ.) |
||
|
4 GHz to 5 GHz |
<-159 dBm (Typ.) |
||
|
5 GHz to 6 GHz |
<-155dBm (Typ.) |
||
|
Display Functoin |
|||
|
Display |
|||
|
Display Grid |
1,2,3,5,10,15,20dB |
||
|
Points |
|||
|
Normal Bandwidth |
551(Typ.) |
||
|
Zero Bandwidth |
1024 |
||
|
Trace |
|||
|
Number |
4 |
||
|
Function |
Max. Hold, Min. Hold, Video Average, Power Average, Freeze, Refresh |
||
|
Only memory, Only data, Data And Memory, Data +/- Memory, Data to Memory |
|||
|
RF Input VSWR |
|||
|
Test Condition: (RF attenuation ≥ 10 dB) |
|||
|
VSWR |
300 kHz to 3 GHz |
<2 (Nominal Value) |
|
|
3 GHz to 6 GHz |
<2 (Nominal Value) |
||
|
Nonlinear Index |
|||
|
Second Harmonic Distortion |
Test conditions: RF attenuation 10 dB, Input -30 dBm |
||
|
10MHz - 1.5GHz |
<-60dBc |
||
|
1.5GHz - 3GHz |
No |
||
|
Third Order Intermodulation |
Test conditions: RF attenuation 10dB, Input -20dBm, Frequency Interval 1MHz |
||
|
30 - 3000MHz |
+12dBm |
||
|
3000 - 6000MHz |
+10dBm |
||
|
Spurious Response |
|||
|
Vestigital Spurious |
<-90dBm, RF attenuation 0dB |
||
|
Input Correlation Spurious |
<-80dbc Test conditions: RF attenuation 0dB, Input -20 dBm |
||
|
Medium Frequency Feed Through |
<-55dBc; Medium Frequency =25MHz |
||
|
<-60dbc @ F1±250MHz (F1: Input Frequency) |
|||
|
Scan |
|||
|
Scan time |
Scan width ≥ 100 Hz |
1 ms to 2,000 s |
|
|
Zero Scan |
80μs to 300 s |
||
|
Scan mode |
Auto, Single |
||
|
Trigger |
|||
|
Free to trigger |
|
||
|
Video trigger |
Threshold editable |
||
|
Detection |
|||
|
Detection methods |
Positive Peak, Negative Peak, Sample, RMS, Standard |
||
|
Connector |
|||
|
Radio-Frequency Signal Input |
Impedance |
50 Ω |
|
|
Connector |
N type Female |
||
|
Reference Source |
|||
|
Internal Reference Clock |
Frequency |
100 MHz, ±1 ppm |
|
|
External Reference Clock Input |
Frequency |
100 MHz |
|
|
Input Level |
0 dBm to +10 dBm |
||
|
Impedance |
50 Ω |
||
|
Connector |
SMA (F) |
||
|
Communication Interface |
|||
|
USB 1 |
Connector |
Type A |
|
|
USB 2 |
Connector |
Type B |
|
|
LAN Port |
Connector |
10/100M, RJ-45 |
|
|
AC Adapter |
|||
|
Input Voltage Range |
100 V to 240 V AC, 50~60Hz |
||
|
16 V DC/3.75A |
|||
|
General Specification |
|||
|
Language |
Chinese, English |
||
|
Display Screen |
7 inch Capacitive Touch screen, 1024×600 Pixels |
||
|
Internal Storage |
16GB SD Card |
||
|
Battery |
11.8V, 7800 mAh lithium battery |
||
|
Power consumption |
16 W (Typ.) |
||
|
Environment |
|||
|
Temperature |
Operating Temp. Range |
-10℃ to 55℃ |
|
|
Storage Temp. Range |
-40℃ to 70℃ |
||
|
Humidity |
0℃ to 30℃ |
≤ 95% |
|
|
30℃ to 40℃ |
≤ 75% |
||
|
Altitude |
Operation Altitude |
≤ 2000 Metres |
|
|
Dimensions |
|||
|
(L×W× H) |
290 mm × 175 mm × 75 mm |
||
|
Weight |
|||
|
Weight (Including Battery) |
2. 8 kg |
||
* Specifications subject to change without notice;
Notes:
(1) Specifications apply to the following conditions: the instrument is in the calibration cycle, stored at 0 °C to 55 °C for at least two hours, and preheating for 40 minutes. The data in this manual is a technical indicator containing measurement uncertainty unless otherwise stated.
(2) Typ.: Represents the typical performance that can be achieved with 80% of the test results at room temperature (about 25 °C). This data is not guaranteed data and does not include measurement uncertainty.
(3) Nominal Value：Represents the expected average performance or design performance characteristics, such as a 50ΩConnector. This data is not guaranteed and is measured at room temperature (about 25 °C).
(4) Measurement value：Represents performance characteristics measured during the design phase, which can be compared with expected performance, such as amplitude drift over time. This data is not guaranteed and is measured at room temperature (about 25 °C).
(5) Unless otherwise stated, all the charts in the manual are derived from the results measured by multiple instruments at room temperature.
●Order Information
Standard:
Host, Quick Reference, AC Adapter, Lithium Battery, Carrying Case, Test Cable
